Reviewed Scientific Journals

Reviewed Scientific Journals

2012

Anandhan, S., Madhava Sundar, S., Senthil, T., Mahendran, A.R., Shibulal, G.S.: Extruded poly(ethylene-co-octene)/fly ash composites – value added products from an environmental pollutant. Journal of Polymer Research, 2012, 19, 9840  

Anandhan, S., Patil, H.G., Mahendran, A.R.: Poly(ethylene-co-vinyl acetate-co-carbon monoxide)/Layered Silicate Nanocomposites: Preparation, Characterization and Properties. Advanced science letters, 2011, 6, 7, 134–140  

Badila, M., Dolezel-Horwath, E., Zikulnig-Rusch, E.M., Schmidt, T., Kandelbauer, A.: Evaluation of the compatibility between low pressure melamine (LPM) film printing substrates and inkjet inks / Untersuchungen zur Kompatibilität von Drucktinten und Melaminfilmen als Drucksubstrate. European Journal of Wood and Wood Products, 2012, 70, 639–649  

Buksnowitz, C., Evans, R., Müller, Ul., Teischinger, A.: Indented rings (hazel growth) of Norway spruce reduce anisotropy of mechanical properties. European Journal of Wood and Wood Products, 2012, 70 (4), 471–477  

D'Amico, S., Müller, Ul., Berghofer, E.: Influence of ageing on mechanical properties of wood to wood bonding with wheat flour glue. European Journal of Wood and Wood Products, 2012, published online

Fischer, N., Hull, K., Klapötke, T. M., Stierstorfer, J., Laus, G., Hummel, M., Froschauer, C., Wurst, K., Schottenberger, H.: 5,5´-Azoxytetrazolates – a new nitrogen-rich dianion and its comparison to 5,5´-azotetrazolate. Dalton Transactions, 2012, 41, 11201–11211, published

Froschauer, C., Hummel, M., Laus, G., Schottenberger, H., Sixta, H., Weber, H. K., Zuckerstätter, G.: Dialkyl Phosphate-Related Ionic Liquids as Selective Solvents for Xylan. Biomacromolecules, 2012, published online

Froschauer, C., Kahlenberg, V., Laus, G., Schottenberger, H.: Halogen Interaction in 2,4,5-Tribromoimidazolium Salts. Crystals, 2012, 2, 1017–1033, published

Froschauer, C., Sixta, H., Weber, H. K., Laus, G., Kahlenberg, V., Schottenberger, H.: A Superior New Route to Methyl Phosphonate-based Ionic Liquids. Chemistry Letters, 2012, 41, 945–946, published online

Froschauer, C., Wurst, K., Laus, G., Weber, H. K., Schottenberger, H.: Crystal structure of 1-butyl-2,3-dimethylimidazolium O,Se-dimethyl selenophosphate, [C9H17N2][C2H6OPSe], a new ionic liquid. Zeitschrift für Kristallographie NCS, 2012, 227, 21–23, published

Froschauer, C., Wurst, K., Schottenberger, H.: Crystal structure of 1,3-bis(trimethylsilyl)imidazolium. Zeitschrift für Kristallographie NCS, 2011, 226, 4, 545–546, published

Frybort, S., Mauritz, R., Teischinger, A., Müller, Ul.: Investigation of the Mechanical Interactions at the Interface of Wood-Cement Composites by means of Electronic Speckle Pattern Interferometry. Bioresources, 2012, published


Gehmayr, V., Potthast, A., Sixta, H.: Reactivity of dissolving pulps modified by TEMPO-mediated oxidation. Cellulose, 2012, published online

Gehmayr, V., Sixta, H.: Pulp properties and their influence on enzymatic degradability. Biomacromolecules, 2012, 13, 3, 645–651, published online

Gindl-Altmutter, W., Müller, Ul., Konnerth, J.: The significance of lap-shear testing of wood adhesive bonds by means of Volkersens shear lag model. European Journal of Wood and Wood Products, 2012, DOI 10.1007/s00107-012-0621-z, published

Gütsch, J. S., Nousiainen, T., Sixta, H.: Comparative evaluation of autohydrolysis and acid-catalyzed hydrolysis of E. globulus wood. Bioresource Technology, 2012, 109, 77–85, published

Gütsch, J. S., Sixta, H.: Regeneration of Spent Activated Charcoals Used for Lignin Removal from Prehydrolysis-Kraft Prehydrolyzates. Industrial and Engineering Chemistry Research, 2012, published

Herrero Acero, E., Ribitsch, D., Diaz Rodriguez, R., Dellacher, A., Zitzenbacher, S., Marold, A., Greimel, K.J., Schroeder, M., Kandelbauer, A., Heumann, S., Nyanhongo, G.S., Schwab, H., Guebitz, G.M.: Two-step enzymatic functionalisation of polyamide with phenolics. Journal of Molecular Catalysis B: Enzymatic, 06.04.2012, 79, 54–60

Hummel, M., Froschauer, C., Laus, G., Röder, T., Kopacka, H., Hauru, L. K., Weber, H. K., Sixta, H., Schottenberger, H.: Dimethyl phosphorothioate and phosphoroselenoate ionic liquids as solvent media for cellulosic materials. Green Chemistry, 2011, 13, 9, 2507–2517, published

Mahendran, A.R., Aust, N., Wuzella, G., Müller, U., Kandelbauer, A.: Bio-based Non-Isocyanate Urethane Derived from Plant Oil. Journal of Polymers and the Environment, 2012, 20, 4, 926–931, accepted (http://dx.doi.org/10.1007/s10924-012-0491-9) 

Mahendran, A.R., Wuzella, G., Aust, N., Kandelbauer, A., Müller, U.: Photocrosslinkable modified vegetable oil based resin for wood surface coating application. Progress in Organic Coatings, 2011, 74, 697–704  

Mathan, N.D., Mahendran, A.R., Rajkumar. T., Ponraju, D., Vijayakumar, C.T.: Thermal degradation of pentaerythritol phosphate alcohol. Journal of Thermal Analysis and Calorimetry, 2011, accepted (http://dx.doi.org/10.1007/s10973-011-2015-6)  

Mozdyniewicz, D. J., Sixta, H.: Carbohydrate degradation reactions during alkaline steeping of dissolving pulp – Influence of air exclusion. Lenzinger Berichte, 2012, 90, 103–107, published

Nguyen, H.-L., Putz, R.: Rheologische und mechanische Eigenschaften von extrudierten Holz-Polypropylen-Verbundwerkstoffen. Holztechnologie, 2012, 53, 5, 22–26, published

Pretschuh, C., Müller, U., Wuzella, G., Dorner, R., Eckmann, R.: Dielectric analysis as curing control for aminoplast resins – correlation with DMA. European Journal of Wood and Wood Products, 2012, 70, 5, 749–753, published

Rathke, J., Eckmüllner, O.: Reduktion von Brettdickenvariation durch statische Prozesskontrolle unter Anwendung von Six Sigma. Holztechnologie, 2012, accepted

Rathke, J., Huber, H., Teischinger, A., Müller, Ul., Hansmann, C.: Verwendbarkeit von Laubschwachholz in der Sägeindustrie – Teil 1: Ausbeuteberechnung und Technologiebewertung. Holztechnologie, 2012, 5, 46–50, published

Rathke, J., Huber, H., Teischinger, A., Müller, Ul., Hansmann, C.: Verwendbarkeit von Laubschwachholz in der Sägeindustrie – Teil 2: Schnittkostenkalkulation und Berechnung des maximal möglichen Rundholzpreis. Holztechnologie, 2012, 6, 50–54, accepted

Rathke, J., Sinn, G., Harm, M., Teischinger, A., Weigl, M., Müller, Ul.: Fracture energy vs. internal bond strength – mechanical characterization of wood based panels. Wood Material Science and Engineering, 2012, DOI:10.1080/17480272.2012.699979, 7(2), 1–10, published online

Rathke, J., Sinn, G., Harm, M., Teischinger, A., Weigl, M., Müller, Ul.: Effects of alternative raw materials and varying resin content on mechanical and fracture mechanical properties of particle board. Bioresources, 2012, 7(3), 2970–2985, published

Rathke, J., Sinn, G., Konnerth, J., Müller, Ul.: Strain Measurements within Fiber Boards. Part I: Inhomogeneous Strain Distribution within Medium Density Fiberboards (MDF) Loaded Perpendicularly to the Plane of the Board. Materials, 2012, 5, 1115–1124, published

Rathke, J., Sinn, G., Konnerth, J., Müller, Ul.: Strain measurements within fibre boards. Part III: Analysing the process zone at the crack tip of MDF Double Cantilever I-Beam specimens. Materials, 2012, 5, 11, 2190–2204, published

Rathke, J., Sinn, G., Weigl, M., Müller, Ul.: Analysing orthotropy in the core layer of wood based panels by means of fracture mechanics. European Journal of Wood and Wood Products, 2012, published online

Rauhala, T., King, A.W.T., Zuckerstätter, G., Suuronen, S., Sixta, H.: Effect of autohydrolysis on the lignin structure and the kinetics of delignification of birch wood. Nordic Pulp and Paper Research Journal, 2011, 4, 386–391, published online

Riegler, M., Gindl-Altmutter, W., Hauptmann, M., Müller, Ul.: Detection of UF resin on wood particles and in particleboards: potential of selected methods for practice-oriented offline detection. European Journal of Wood and Wood Products, 2012, 70, 829–837, published

Rosner, S., Riegler, M., Vontobel, P., Mannes, D., Eberhard H., Karlsson, B., Hansmann, C.: Within-ring movement of free water in dehydrating Norway spruce sapwood visualized by neutron radiography. Holzforschung, 2012, 66, 6, 751–756, published

Sinn, G., Müller, Ul., Konnerth, J., Rathke, J.: Strain measurements within fibre boards. Part II: Strain concentrations at the crack tip of MDF specimens tested by the wedge splitting method. Materials, 2012, 5, 1495–1507, published

Sobczak, L., Putz, R., Brüggemann, O.: Polyolefin Composites with Natural Fibers and Wood – Part II: Modification of the Fiber/Filler-Matrix Interaction. Journal of Applied Polymer Science, doi: 10.1002/app.36935, accepted

Sobczak, L., Welser, R., Haider, A., Brüggemann, O.: PP-based WPCs – performance of five commercial MA-PP coupling agents. Journal of Thermoplastic Composite Materials, 10.1177/0892705712447806, published online

Stern, T., Heil, G., Ledl, C., Schwarzbauer, P.: Identifying Innovation Barriers using a Delphi Method Approach: The Case of Technical Lignin in the Wood-based Panel Industry. International Wood Products Journal, 2012, 3, 2, 116–123, published

Surender, R., Mahendran, A.R., Thamaraichelvan, A., Alam, S., Vijayakumar, C.T.: Curing studies of bisphenol a based bismaleimide and cloisite 15a nanoclay blends using differential scanning calorimetry and model-free kinetics. Journal of Applied Polymer Science, 2012, accepted (http://dx.doi.org/10.1002/app.38219)

Teischinger, A.: Small and medium sized wood businesses – Opportunities and challenges for a sustainable regional development. In: M. Neményi, B. Heil (eds.): The impact of urbanization, industrial, agricultural and forest technologies on the natural environment, 2012, 343–358, Nyugat-magyarországi Egyetem, Sopron; ISBN: 978-963-19-7352-5

Vay, O., Obersriebnig, M., Konnerth, J., Müller, Ul., Gindl-Altmutter, W.: Using scanning thermal microscopy (SThM) for the study of thermal conductivity of wood at cell-wall level. Holzforschung, 2012, accepted

Veigel, S., Rathke, J., Weigl, M., Gindl-Altmutter, W.: Particle board and oriented strand board prepared with nanocellulose-reinforced adhesive. Nanomaterials, 2012, accepted

Veigel, S., Rathke, J., Weigl, M., Gindl-Altmutter, W.: Particle Board and Oriented Strand Board Prepared with Nanocellulose-Reinforced Adhesive. Journal of Nanomaterials, 2012, 1–8, published

Weigl, M., Maschl, G., Wimmer, R., Mitter, R.: Within-process and seasonal changes during industrial production of high-density fibreboard (HDF). Part 2: PLS modelling of chemical alterations, refining conditions, and panel thickness swell. Holzforschung, 2012, DOI 10.1515/hf-2012-0033, published online

Weigl, M., Schmidberger, C., Müller Ul.: Water retention of wood particles – characterization of polarity and particle size. European Journal of Wood and Wood Products, 2012, published online

Weigl, M., Wimmer, R., Ters, T., Mitter, R.: Within-process and seasonal changes during industrial production of high-density fibreboard (HDF). Part 1: Influence of wood species composition on polyoses in the products. Holzforschung, 2012, DOI 10.1515/hf-2012-0031, published online

Wuzella, G., Mahendran, A.R., Müller, U., Kandelbauer, A., Teischinger, A.: Photocrosslinking of an Acrylated Epoxidized Linseed Oil: Kinetics and its Application for Optimized Wood Coatings. Journal of Polymers and the Environment, 2012, 20, 4, 1063–1074, accepted (http://dx.doi.org/10.1007/s10924-012-0511-9)