Reviewed Scientific Journals

2022

Almhofer, L., Paulik, C., Bammer, D., Schlackl, K., Bischof, R.H.: Contaminations impairing an acetic acid biorefinery: Liquid-liquid extraction of lipophilic wood extractives with fully recyclable extractants. Separation and Purification Technology, https://doi.org/10.1016/j.seppur.2022.122869, 15.12.2022, veröffentlicht

Almhofer, L., Bischof, R.H., Madera, M., Paulik, C.: Kinetic and Mechanistic Aspects of Furfural Degradation in Biorefineries. The Canadian Journal of Chemical Engineering, https://doi.org/10.1002/cjce.24593, 05.08.2022, veröffentlicht

Arminger, B., Gindl-Altmutter, W., Hansmann, C.: Efficient recovery of superhydrophobic wax surfaces on solid wood. European Journal of Wood and Wood Products, https://doi.org/10.1007/s00107-022-01793-8, 06.02.2022, veröffentlicht

Aufischer, G., Kamm, B., Paulik, C.: Depolymerisation of kraft-lignin towards high value-added products: antioxidants and UV absorber. Holzforschung/Wood Research and Technology (DE GRUYTER), 76, 9, 845-852, https://doi.org/10.1515/hf-2022-0023, 12.07.2022, veröffentlicht

Averina, E., Konnerth, J., van Herwijnen, H.W.G.: Protein adhesives: Investigation of factors affecting wet strength of alkaline treated proteins crosslinked with glyoxal. Polymers, 14, 20, 4351, 15.10.2022, veröffentlicht

Averina, E., Konnerth, J., van Herwijnen, H.W.G.: Protein-based Glyoxal-Polyethyleneimine-crosslinked adhesives for wood bonding. Journal of Adhesion, https://doi.org/10.1080/00218464.2021.2020111, 16.01.2022, veröffentlicht

Bartuska, B., Teischinger, A., Riegler, M.: Effects of Spatial Augmented Reality Assistance on the efficiency of Prefabricating Timber Frame Walls. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2022.2085528, 10.06.2022, veröffentlicht

Breitenbach, S., Duchoslav, J., Mardare, A.I., Unterweger, C., Stifter, D., Hassel, A.W., Fürst, C.: Comparative Behavior of Viscose-Based Supercapacitor Electrodes Activated by KOH, H2O, and CO2. Nanomaterials, https://doi.org/10.3390/nano12040677, 18.02.2022, veröffentlicht

Burzic, I., Bolka, S., Miketa, F., Brkic, F., Bobovnik, R., Nardin, B., Vuurens, H., Licata, J.: PLA-PHA blends: biodegradation, morphology, mechanical and thermal properties. TECHNOLOGY, 30.06.2022, long abstract for Circulability Conference in Slovenia, 12. – 14.09.2022, akzeptiert

Busquets Ferrer, M., Solt-Rindler, A., Vay, O., Hansmann, C., Gindl-Altmutter, W.: Bark based porous materials obtained with a simple mechanical foaming procedure. European Journal of Wood Products, https://doi.org/10.1007/s00107-022-01856-w, 08.10.2022, veröffentlicht

Busquets Ferrer, M., Solt-Rindler, A., Hansmann, C., Gindl-Altmutter, W.: Fully bio-based composite foams made of wheat gluten and disintegrated spruce tree bark. Results in Materials, 15, 100299, Juni 2022, veröffentlicht

Derflinger, C., Kamm, B., Paulik, C., Meissner, G., Spod, H.: Efficient and Selective Oxidation of HMF to DFF at moderate reaction conditions by means Ru/Al2O3. Chemistry Select, https://doi.org/10.1002/slct.202201211, 22.09.2022, publiziert

Enengl, C., Unterweger, C., Lone, S.A., Fürst, C.: Screening of spinning oils for melt-spun lignin-based carbon fiber precursors. Journal of Applied Polymer Science, https://doi.org/10.1002/app.52134, 10.01.2022, veröffentlicht

Fürtner, D., Perdomo Echenique, E.A., Hoertenhuber, S.J., Schwarzbauer, P., Hesser, F.: Beyond Monetary Cost-Benefit Analyses: Combining Economic, Environmental and Social Analyses of Short Rotation Coppice Poplar Production in Slovakia. Forests, 13(2), 349, 19.02.2022, veröffentlicht

Ganesan, J., Jeyadevi, S., Saravanamuthu, S.K.S., Mahendran, A.R., Vijayakumar, C.T.: Thermal, mechanical, and electrical properties of difunctional and trifunctional epoxy blends with nanoporous materials. Journal of Elastomers and Plastics, https://doi.org/10.1177/00952443211060400, 10.12.2021, veröffentlicht

Gupta, N., Mahur, B.K., Dilsad Izrayeel, A.M., Ahuja, A., Kumar Ratogi, V.: Biomass conversion of agricultural waste residues for different applications: a comprehensive review. Environmental Science and Pollution Research, https://doi.org/10.1007/s11356-022-22802-6, 08.09.2022, veröffentlicht

Gupta, S., Zasonska, B., Acharya, U., Konefal, M., Pokorny, V., Petrovsky, E., Breitenbach, S., Unterweger,

C., Bober, P.: Magnetoconductive poly(3,4-ethylenedioxythiophene)/maghemite adsorbent for the removal of Reactive Black 5 from aqueous media. Materials Chemistry and Physics, https://doi.org/10.1016/j.matchemphys.2022.126753, 29.09.2022, veröffentlicht

Haas, V., Wenger, J., Ranacher, L., Guigo, N., Sousa, A., Stern T.: Developing future visions for bio-plastics substituting PET – a backcasting approach. Sustainable Production and Consumption, 31, 370-383, 28.02.2022, veröffentlicht

Huemer, K., Lanthaler, K., Weber, H., Weber, H.K.: Part 1: In-Depth Investigation of Potential Growth Inhibitors for Microorganisms Used for the Production of Value-Adding Products from Spent Sulphite Liquor. Lenzinger Berichte, 97, 11, 68-88, https://www.lenzing.com/fileadmin/content/PDF/03_Forschung_u_Entwicklung/EN/Lenzinger_Berichte_97_2022_11.pdf, 13.10.2022, publiziert

Huemer, K., Olschowski, P., Distler, T., Lanthaler, K., Weber, H., Weber, H.K.: Part 2: Elucidating the Interactions of Growth Inhibitors from Spent Sulphite Liquor with Aerobic and Anaerobic Microorganisms. Lenzinger Berichte, 97, 12, 89-98, https://www.lenzing.com/fileadmin/content/PDF/03_Forschung_u_Entwicklung/EN/Lenzinger_Berichte_97_2022_12.pdf, 13.10.2022, publiziert

Huemer, K., Lanthaler, K., Weber, H., Weber, H.K.: Part 3: Detoxification of Spent Sulphite Liquor to Remove Growth Inhibitors in Microbial Transformations. Lenzinger Berichte, 97, 13, 99-108, https://www.lenzing.com/fileadmin/content/PDF/03_Forschung_u_Entwicklung/EN/Lenzinger_Berichte_97_2022_13.pdf, 13.10.2022, publiziert

Jakob, M., Mahendran, A.R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., Veigel, S.: The Strength and Stiffness of Oriented Wood and Cellulose-Fibre Materials: A Review. Progress in Materials Science, https://doi.org/10.1016/j.pmatsci.2021.100916, Vol 125, 100916, April 2022, veröffentlicht

Jocić, A., Breitenbach, S., Pašti, I.A., Unterweger, C., Fürst, C., Lazarević-Pašti, T.: Viscose-derived activated carbons as adsorbents for malathion, dimethoate, and chlorpyrifos – screening, trends and analysis. Environmental Science and Pollution Research, https://pubmed.ncbi.nlm.nih.gov/35044608/, 19.01.2022, veröffentlicht

Jocić, A., Breitenbach, S., Bajuk-Bogdanović, D., Pašti, I.A., Unterweger, C., Fürst, C., Lazarević-Pašti, T.: Viscose-derived activated carbons fibers as highly efficient adsorbents for dimethoate removal from water. Molecules, https://doi.org/10.3390/molecules27051477, 22.02.2022, veröffentlicht

Khalifa, M., Berndt, A., Shamitha, C., Lammer, H., Wuzella, G.: Hybridization Effect of Cellulose Paper and Post-curing Conditions on the Mechanical Properties of Flax Fiber Reinforced Epoxy Bio-Composite. Journal of Applied Polymer Science, https:\\10.1002/app.20222123, 01.10.2022, akzeptiert

Kovacevic, M., Rieder-Gradinger, C., Teischinger, A., Srebotnik, E.: Volatile organic compounds emitted from Scots pine and Norway spruce wood. European Journal of Wood Products, https://doi.org/10.1007/s00107-022-01909-0, 27.12.2022, veröffentlicht

Lehrhofer, A.F., Goto, T., Kawada, T., Rosenau, T., Hettegger, H.: The in vitro synthesis of cellulose – A mini-review. Carbohydrate Polymers, https://doi.org/10.1016/j.carbpol.2022.119222, online, 07.02.2022,

01.06.2022, veröffentlicht

Lindemann, M., Widhalm, B., Kuncinger, T., Srebotnik, E.: Potential of a year-round, closed-loop process for microbial VOC reduction in pinewood strands by Pseudomonas putida PX1 cultivated in seasonally varying MDF process effluents. Bioresource Technology Reports, https://doi.org/10.1016/j.biteb.2022.100995, 28.02.2022, veröffentlicht

Mahendran, A.R., Wuzella, G., Pichler, S., Lammer, H.: Properties of Different Chemically Treated Woven Hemp Fabric Reinforced Bio-Composites. Journal of Renewable Materials, https:\\doi:10.32604/jrm.2022.017835, 20.01.2022, veröffentlicht

Malkamaki, A., Korhonen, J.E., Berghall, S., Rustas, C.B., Berno, H., Carreira, A., D'Amato, D., Dobrovolsky, A., Giertliova, B., Holmgren, S., Mark-Herbert, C., Masiero, M., Nagy, E., Navratilova, L., Puelzl, H., Ranather, L., Secco, L., Suomala, T., Toppinen, A., Valsta, L., Vybostok, J., Zellweger, J.: Public perceptions of using forests to fuel the European bioeconomy: findings from eight university cities. Forest Policy and Economics, 140, 102749, 01.07.2022, veröffentlicht

Milakin, K.A., Gupta, S., Pop-Georgievski, O., Morávková, Z., Acharya, U., Taboubi, O., Breitenbach, S., Gavrilov, N., Unterweger, C., Bober, P.: Macroporous nitrogen-containing carbon for electrochemical capacitors. Electrochimica Acta, https://doi.org/10.1016/j.electacta.2022.140370, 11.04.2022, veröffentlicht

Padhi, S., Bartolome, M.J., Nyanhongo, G.S., Schwaiger, N., Pellis, A., van Herwijnen, H.W.G., Gübitz, G.: Role of surface enhancement in the enzymatic cross-linking of lignosulfonate using alternative downstream techniques. ACS Omega, 7, 23749, 27.06.2022, veröffentlicht

Perdomo Echenique, E.A., Ryberg, M., Eldbjørg, B.V., Schwarzbauer, P., Hesser, F.: Analyzing the Consequences of Sharing Principles on Different Economies: A Case Study of Short Rotation Coppice Poplar Wood Panel Production Value Chain. Forests, 13(3), 461, 16.03.2022, veröffentlicht

Pichler, C., Fürtner, D., Hesser, F., Schwarzbauer, P., Ranacher, L.: The Role of the Social Licence to Operate in the Emerging Bioeconomy – A Case Study of Short-Rotation Coppice Poplar in Slovakia. Land, 11, 1555, 14.09.2022, veröffentlicht

Ramachandrareddy, B., van Herwijnen, H.W.G., Greeley, B., Bredesen, R., Konnerth, J.: Mechanical properties of wood adhesive bond lines tested in service classes according to Eurocode 5. International journal of adhesion and adhesives, https://doi.org/10.1016/j.ijadhadh.2022.103233, 02.08.2022, veröffentlicht

Rosenfeld, C., Solt-Rindler, P., Sailer-Kronlachner, W., Kuncinger, T., Konnerth, J., Geyer, A., van Herwijnen, H.W.G.: Effect of mat moisture content, adhesive amount and press time on the performance of particleboards bonded with fructose-based adhesive. Materials, 15, 23, 8701, 06.12.2022, veröffentlicht

Rosenfeld, C., Sailer-Kronlacher, W., Konnerth, J., Solt-Rindler, P., Pellis, A., Rosenau, T., Potthast, A., van Herwijnen, H.W.G.: Hydroxymethylfurfural: A key to increased reactivity and performance of fructose-based adhesives. Industrial crops and products, 187, 115536, 30.08.2022, veröffentlicht

Sailer-Kronlachner, W., Rosenfeld, C., Böhmdorfer, S., Konnerth, J., van Herwijnen, H.W.G.: Influence of critical synthesis parameters and precursor stabilization on the development of adhesive strength in Fructose-HMF-Amine Adhesives. Forest Products Journal, 72, 1, 29.12.2022, veröffentlicht

Sailer-Kronlachner, W., Rosenfeld, C., Böhmdorfer, S., Bacher, M., Konnerth, J., Rosenau, T., Potthast, A., Geyer, A., van Herwijnen, H.W.G.: Scale-Up of 5-Hydroxymethylfurfural rich adhesive precursor production and structural features of humin side products. Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-022-03200-x, 17.08.2022, veröffentlicht

Saravanamuthu, S.K.S., Shamim Rishwana, S., Ramani, R., Mahendran, A.R., Vijayakumar, C.T.: Particulate Reinforcements in Dicyanate Composites with Nanoporous Aluminum Fumarate as Reactive Filler: Thermal Properties. Polymer (Korea), https://doi.org/10.7317/pk.2022.46.4.426, Vol. 46, No. 4, pp.426-435, veröffentlicht

Savandaiah, C., Sieberer, S., Steinbichler, G.: Additively Manufactured Composite Lug with Continuous Carbon Fibre Steering Based on Finite Element Analysis. Materials, https://doi.org/10.3390/ma15051820, 28.02.2022, veröffentlicht

Savandaiah, C., Sieberer, St., Plank, B., Maurer, J., Steinbichler, G., Sapkota, J.: Influence of Rapid Consolidation on Co-Extruded Additively Manufactured Composites. Polymers, https://doi.org/10.3390/polym14091838, 29.04.2022, veröffentlicht

Savandaiah, C., Maurer, J., Plank, B., Steinbichler, G., Sapkota, J.: Rapid Consolidation of 3D Printed Composite Parts Using Compression Moulding for Improved Thermo Mechanical Properties. Rapid Prototyping Journal, https://doi.org/10.1108/RPJ-11-2021-0311, 14.06.2022, veröffentlicht

Schöffmann, E., Mahendran, A.R., Zikulnig-Rusch, E.M., Plank, H.: Advancement and challenges in sample preparation for atomic force microscopy and infrared microscopy for wood‐based materials. Journal of Microscopy, http://doi.org/10.1111/jmi.13154, 17.10.2022, veröffentlicht

Stockinger, T., Steiner, M., Egger, F., Padinger, F., Schwödiauer, R., Wilmer, D., Mahendran, A.R., Kaltenbrunner, M., Müller, U.: High porous, ultra-thin paper sensors - An option for successful sensor integration. Sensors and Actuators: A Physical, https://doi.org/10.1016/j.sna.2022.114098, 01.02.2023, veröffentlicht

Sumerskii, I., Solt-Rindler, P., van Herwijnen, H.W.G., Sulaeva, I., Ters, T., Rosenau, T., Potthast, A.: Lignin-containing PMDI-Binder for Wood Particle Board Production. Lenzinger Berichte, 97, 109, 01.10.2022, veröffentlicht

Süss, R., Zeilerbauer, L., Kamm, B., Meißner, G., Spod, H., Paulik, C.: Depolymerisation of Organosolv Lignin by Supported Pt Metal Catalysts. Catalysis Communication, https://doi.org/10.1016/j.catcom.2022.106503, 08.09.2022, veröffentlicht

Tan, X., Peng, Q., Subrova, T., Wiener, J., Venkatraman, M., Militky, J., Xiadong, W., Wu, J., Mahendran, A. R., Lammer, H.: High Efficient Removal of Methylene Blue Using Microcrystalline Cellulose/Polyvinyl Alcohol/Expanded Graphite 3D Porous Foam as a “Green” Adsorbent. Research Square, https://doi.org/10.21203/rs.3.rs-1421874/v1, 01.03.2022, veröffentlicht

Tran, A., Konnerth, J., van Herwijnen, H.W.G., Gindl-Altmutter, W.: Low temperature and moisture dependent curing behavior of selected wood adhesives. International journal of adhesion and adhesives, 117, 103178, 04.05.2022, veröffentlicht

Unterweger, C., Ranzinger, M., Duchoslav, J., Piana, F., Pasti, I., Breitenbach, S., Stifter, D., Fürst, C.: Electrically conductive bio-composites based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and wood-derived carbon fillers. Journal of Composites Science, https://www.mdpi.com/2504-477X/6/8/228, 04.08.2022, veröffentlicht

Wolfsgruber, M., da Cruz, M.G.A., Bischof, R.H., Budnyk, S., Beele, B., Monti, S., Barcaro, G., Rodrigues, B.V.M., Paulik, C., Slabon, A.: Electrocatalytic Reduction of Aldonic Acids to Aldoses on Gold Electrodes. ACS Sustainable Chemistry & Engineering, https://doi.org/10.1021/acssuschemeng.2c05576, 20.12.2022, veröffentlicht

Zhang, H., Lei, X., Hu, Q., Wu, S., Aburaia, M., Gonzalez-Gutierrez, J., Lammer, H.: Hybrid Printing Method of Polymer and Continuous Fiber-Reinforced Thermoplastic Composites (CFRTPCs) for Pipes through Double-Nozzle Five-Axis Printer. Polymers, https://doi.org/10.3390/polym14040819, 20.02.2022, veröffentlicht