Reviewed Scientific Journals




Aigner, D., Hinterholzer, L., Almhofer, L., Bischof, R.H., Wrodnigg, T.M.: Conversion of Xylose into D-Xylitol using Catalytic Transfer Hydrogenation with Formic Acid as H-Donor. BioResources, 18, 4, 8631-8652, 31.10.2023, veröffentlicht


Almhofer, L., Paulik Ch., Bischof, R.H.: Simultaneous posthydrolysis and liquid–liquid extraction: a SIMPLLE process to detoxify eucalyptus prehydrolysis liquor. Biomass Conversion and Biorefinery,, 24.07.2023, veröffentlicht



Averina, E., Konnerth, J., van Herwijnen, H.W.G., Li, K.: Investigation of poly (styrene-4-vinylbenzyl chloride) as a curing agent for alternative plant proteins. The Journal of Adhesion,, 02.06.2023, veröffentlicht


Bartolome, M. J., Padhi, S.S.P., Fichtberger, O.G., Schwaiger, N., Seidl, B., Kozich, M., Nyanhongo, G.S., Guebitz, G. M.: Improving properties of starch-based adhesives with carboxylic acids and enzymatically polymerized lignosulfonates. International Journal of Molecular Sciences, 23, 135457, 04.11.2022, veröffentlicht


Breitenbach, St., Knapic, D., Unterweger, Ch., Fürst, Ch., Hassel, A.W.: Lignin-based porous junction for silver-silver chloride reference electrodes. Journal of Electrochemical Science and Engineering,, 30.01.2023, veröffentlicht


Ebner, S., Spirk, S., Stern, T., Mair-Bauernfeind, C.: How Green are Redox Flow Batteries? ChemSusChem 2023, e202201818. 01.02.2023, veröffentlicht


Ekbote, G., Khalifa, M., Venkatesa Perumal, B., Anandhan, S.: A new multifunctional energy harvester based on mica nanosheets-dispersed PVDF nanofabrics featuring piezo-capacitive, piezoelectric and triboelectric effects. RSC applied Polymer science, 10.1039/D3LP00080J, veröffentlicht


Ekbote, G., Khalifa, M., Venkatesa Perumal, B., Srinivasan, A.: Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics. Flexible and Printed Electronics, 10.1088/2058-8585/acd010, 02.05.2023, veröffentlicht


Derbas, M., Frömel-Frybort, St.., Laaber, C., Möhring, H.C., Riegler, M.: Supervised classification of wood species during milling based on extracted cut events from ultrasonic air-borne acoustic signals. Wood Material Science and Engineering,, 22.05.2023, veröffentlicht


Derbas, M., Jaquenmond, A., Frömel-Frybort, St., Güzel, K., Möhring, H.C., Riegler, M: Multisensor data fusion and machine learning to classify wood products and predict workpiece characteristics during milling. CIRP: Journal of manufacturing science and technology, 27.09.2023, veröffentlicht


Derflinger, Ch., Kamm, B., Leitner, G., Paulik, Ch.: Novel synthesis strategy for the production of fully bio-based binders using 2,5-diformylfuran. European Journal of Organic Chemistry, 26 (23) 2023,, 10.05.2023, veröffentlicht


Derflinger, Ch., Kamm, B., Meissner, G., Spod, H., Paulik, Ch.: Development of a consolidated heterogeneous chemical process for selective oxidation of HMF for industrial upscaling. Chemistry Select,, 09.10.2023, veröffentlicht


Dhanalakshmi, J., Saravanamuthu, S.K.S., Sivaprakash, S., Vijayakumar, Ch.T.: Studies on thermoset blend of bismaleimide having multiple S.: groups and biscyanate ester. Journal of Elastomers & Plastics,, 15.02.2023, veröffentlicht


Distler, T., Huemer, K., Leitner, V., Bischof, R.H., Groiß, H., Guebitz, G. M.: Production of bacterial cellulose by Komagateibacter intermedius from spent sulfite liquor. Bioresource Technology Reports, 24, 101655,, 01.12.2023, veröffentlicht


Ferdinánd, M., Jerabek, M., J., Várdai, R., Lummerstorfer, T., Pretschuh, C., Gahleitner, M., Faludi, G., Móczó, J., Pukánsky, B.: Impact modification of wood flour reinforced PP composites: Problems, analysis, solution. Composites Part A, 167,, 13.01.2023, veröffentlicht


Ferdinand, M., Vardai, R. Lummerstorfer, T., Pretschuh, C., Gahleitner, M., Moczo, J., Pukanszky, B.: Impact modification of PP with short PET fibres: Effect of heat setting on fiber characteristics and composite properties. Composite Structures, 311, 16.02.2023, veröffentlicht


Gavrilov, N., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pašti, I.A.: Exploring the Impact of DAHP Impregnation on Activated Carbon Fibers for Efficient Charge Storage and Selective O2 Reduction to Peroxide C., 06.11.2023, veröffentlicht


Goto, T., Zaccaron, S., Hettegger, H., Bischof, R.H., Fackler, K., Potthast, A., Rosenau, T.: Evaluating chelating agents and their effects on cellulosic pulps during P-stage bleaching. Part 1: analytical method development. Cellulose, 30, 3887–3900, 04.03.2023, veröffentlicht


Gritsch, S.M., Mihlyi, S., Bartl, A., Ipsmiller, W., Jan-Halver, U., Putz, R., Quartinello, F., Gübitz, G.M.: Closing the cycle: Enzymatic recovery of high purity glucose and polyester from textile blends. Resources, Conservation and Recycling, 188, 106701,, 31.01.2023, veröffentlicht


Gupta, N., Mahendran, A.R., Khalifa, M.: Application of Printed Paper Sensors in Characterizing Curing Behavior of Thermosetting Resin Systems Using Dielectric Spectroscopy. IEEE Xplore, DOI: 10.1109/IWIS61214.2023.10302760, veröffentlicht


Hesser, F., Groiß-Fürtner, D., Woitsch, L., Mair-Bauernfeind, C.: Ex-Ante Eco-Efficiency Assessment of Dendromass Production: Conception and Experiences of an Innovation Project. Land 2023,, 12, 839, 06.04.2023, veröffentlicht


Husić, I., Mahendran, A.R., Sinic, J., Jocham, Ch., Lammer, H.: Interaction of porous substrate and vegetable oil-based hydrophobic thermoset coatings during UV-polymerization. Journal of Plastic Film and Sheeting, 39, 4,, 04.10.2023, veröffentlicht


Janesch, J., Bacher, M., Padhi, S.S.P., Rosenau, T., Gindl-Altmutter, W., Hansmann, Ch.: Bio-based alkyd resins from plant oil and furan-2,5-dicarboxylic acid. ACS Sustainable Chemistry & Engineering, 11, 50, 17625–17632, 04.12.2023, veröffentlicht


Jaxel, J., Merio, A., Kohlhuber, N., Beaumont, M., Wimmer, R., Rosenau, T., Hansmann, Ch., Liebner, F., Böhmdorfer, S.: Facile chemical hydrophobization of thin-layer plates by vapor deposition of methyltrimethoxysilane for reversed-phase chromatography. JPC - Journal of Planar Chromatography - Modern TLC,, 2023, veröffentlicht


Khalifa, M., Berndt, A., Shamitha, C., Lammer, H., Wuzella, G.: Hybridization Effect of Cellulose Paper and Post-curing Conditions on the Mechanical Properties of Flax Fiber Reinforced Epoxy Bio-Composite. Journal of applied polymer science, 10.1002/app.20222123, 10.01.2023, veröffentlicht


Khalifa, M., Gupta, N., Bagawan, A. H., Lammer, H., Wuzella, G.: Multifunctional PVDF Film Embedded with Surfactant Assisted-Graphene with Excellent Piezo-capacitance. Piezoelectric and Triboelectric Properties for Various Applications, Polymer, 10.1016/j.polymer.2023.126383, veröffentlicht


Khalifa, M., Wuzella, G., Lammer, H.: The Green Catalyst: Role of Hemp Fibers in the Curing Reaction of Bio-Based Epoxy Composites. Materials Today Communications, 10.1016/j.mtcomm.2023.107052, veröffentlicht


Kienberger, M., Demmelmayr, P., Leitner, V., Egermeier, M.: Selective isolation of acetic acid and lactic acid from heterogeneous fermentation of xylose and glucose. Environmental Technology & Innovation, 29,, 01.02.2023, veröffentlicht


Krassnitzer, P., Wenger, J., Stern, T.: Techno-economic learning in biorefinery research: a meta-level perspective of three exemplary cases. Biofules, Bioproducts and Biorefining, 13.10.2023, veröffentlicht


Kubik, P., Sebek, F., Krejci, P., Brabec, M., Tippner, J., Dvoracek, O., Lechowicz, D., Frömel-Frybort, St.: Linear woodcutting of European beech: Experiments and computations. Wood Science and Technology, 57, 51-74, Jänner 2023, veröffentlicht


Lazarević-Pašti, T., Jocic, A., Milankovic, V., Tasic, T., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pasti, I.: Kinetics of dimethoate, malathion, and chlorpyrifos adsorption on cellulose-derived activated carbons – linking performance to physicochemical properties of the adsorbents. Materials Today Communications, 13.06.2023 veröffentlicht


Leitner, V., Aufischer, G., Solt-Rindler, P., Streffer, F., Gabler, C., Noack, J., van Herwijnen, H.W.G., Paulik, Ch.: Agricultural residue lignin from novel low temperature pre-treatment as potential raw material for LPF resins. Biomass Conversion and Biorefinery,, 09.03.2023, veröffentlicht


Mihalic, M., Pretschuh, C., Lummerstorfer, T., Unterweger, Ch.: Physical and Chemical Foam Injection Moulding of Natural Fibre Reinforced Polypropylene – Assessment of weight reduction potential and mechanical properties. Journal of Composites Science,, 06.04.2023, veröffentlicht


Milan, F., Vardai, R., Lummerstorfer, T., Pretschuh, C., Gahleitner, M., Moczo, J., Pukanszky, B.: Comparison of the effect and efficiency of two impact modification approaches in polypropylene. Express Polymer Letters, 17, 8, 837-849,     27.04.2023, veröffentlicht


Nasseri, L., Rosenfeld, C., Solt-Rindler, P., Mihalic, M., Kandelbauer, A., Konnerth, J., van Herwijnen, H.W.G.: Determination of the gel point of formaldehyde-based wood adhesive by using a multiwave technique. ACS Applied Polymer Materials, 5, 8, 6354, 01.08.2023, veröffentlicht


Pfennich, A.Ch., Schöffmann, E.A., Lammer, H., Hirn, U.: Water-dispersible paper for packaging applications - balancing material strength and dispersibility. Nordic Pulp and Paper Research Journal,, 26.09.2023, veröffentlicht


Preimesberger, Ch., Solt-Rindler, A., Hansmann, Ch., Pfeifer, C.: Influence of size and temperature on the auto-ignition characteristics of solid beech and spruce wood. Fuel,, 127140, 01.04.2023, veröffentlicht


Preimesberger, Ch., Wondrak, M., Solt-Rindler, A., Pfeifer, C., Hansmann, Ch.: Size and temperature dependent oxidative pyrolysis and auto-ignition of spherical beech and spruce wood. Biomass Conversion and Biorefinery,, 25.02.2023, veröffentlicht


Ranjith, A., Mahendran, A.R., Rajkumar, T.: Novel Self Curable phosphorous and spiro phosphorous based maleimides: synthesis, characterization, cure bahavior and thermal properties. Phosphorus, Sulfur, and Silicon and the Related Elements, DOI: 10.1080/10426507.2023.2176499, 20.02.2023, veröffentlicht


Rauter, L., Zikulnig, J., Moldaschl, Th., Holzman, D., Neumaier, L., Khalifa, M., Faller, L. M., Kosel, J.: Printed wireless battery-free sensor tag for health monitoring of polymer composites. IEEE Xplore, 10.1109/JFLEX.2023.3277802,             01.03.2023, veröffentlicht


Rußmayer, H., Egermeier, M., Marx, H. Leitner, V., Sauer, M.: Entirely oil palm-based production of 1,3-propanediol with Lentilactobacillus diolivorans. Environmental Technology & Innovation,, 19.01.2023, veröffentlicht


Saravanamuthu, S.K.S., Syed Mohammed, S.R., Dhanalakshmi, J., Mahendran, A.R., Vijayakumar Ch.T.: Fumarate metal organic frameworks as reactive and curing reaction alternant in hydrophobic bispropargyl ether based matrix resin system. Journal of Polymer Research,, veröffentlicht


Schierer, V., Rieder-Gradinger C., Rosenberg, E.: Method comparison for the identification and characterization of odorants from Scot’s pine (Pinus sylvestris) and OSB made thereof by GC-MS and GC-FID/O using different headspace techniques.           C+46:58hemosensors, 11, 10, 543, 19.10.2023, veröffentlicht


Slavec, A., Hoeben, A., Moreno-Torres, M, Primozic, L., Stern, T.: When intentions do not matter: Climate change mitigation and adaptation innovations in the Forest-based sector. Forest Policy and Economics, Volume 157, 01.12.2023, veröffentlicht


Solt-Rindler, A., Busquets-Ferrer, M., Averina, E., Solt-Rindler, P., Vay, O., Gindl-Altmutter, W., van Herwijnen, H.W.G., Hansmann, Ch.: Hochleistungsmaterialien aus nachwachsenden Rohstoffen. Holztechnologie, 63, 4, 05.-12.2023, veröffentlicht


Stockinger, T., Steiner, M., Egger, F., Padinger, F., Schwödiauer, R., Wilmer, D., Mahendran, A.R., Kaltenbrunner, M., Müller, U.: High porous, ultra-thin paper sensors − An option for successful sensor integration. Sensors and Actuators A: Physical, 350 (2023),, 13.12.2022 (online), 2023 (print), veröffentlicht


Tasić, T., Milanković, V., Batalović, K., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pašti, I.A., Lazarević-Pašti, T.: Application of viscosebased porous carbon fibers in food processing - malathion and chlorpyrifos removal. Foods,, 13.06.2023, veröffentlicht


Vijayakumar, Ch.T., Saravanamuthu, S.K.S., Mahendran, A.R., Syed Mohammed, S.R.: Application of Metal Organic Frameworks as Reactive filler in Bisphenol A based High temperature Thermosets. Intech Open, 07.12.2022, veröffentlicht


Vladan, A., Tasić, T., Milanković, V., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Bajuk-Bogdanović, D., Pašti, I.A., Lazarević-Pašti, T.: How well do our adsorbents actually perform? – The case of dimethoate removal using viscose fibers-derived carbons. International Journal of Environmental Research and Public Health,   , 06.03.2023, veröffentlicht


Wolfsgruber, M., Patil, P., Pichler, C. M., Bischof, R.H., Budnyk, S., Paulik, Ch., Slabon, A.: Potential dependence of gluconic acid to glucose electroreduction on silver. Catalysis Science & Technology,, 30.08.2023, online veröffentlicht


Wurzer, G. K., Bacher, M., Musl, O., Kohlhuber, N., Sulaeva, I., Kelz, T., Fackler, K., Bischof, R.H., Hettegger, H., Potthast, A., Rosenau, T.: From liquid to solid-state, solvent-free oxidative ammonolysis of lignins–an easy, alternative approach to generate “N-lignins”. RSC advances, 13, 14, 9479-9490, 01.10.2023, veröffentlicht


Zeppetzauer, F., Süss, R., Nadányi, R., Putz, R., Lisý, A., Paulik, Ch., Šurina, I., Strižincová, P., Huemer, K., Kamm, B.: Environmentally friendly extraction from Picea abies bark as an approach to accessing valuable antioxidants in biorefineries. Molecules,, 18.07.2023, veröffentlicht