Fachzeitschriften (reviewed)




Altmann, D., Praher, B., Steinbichler, G.: Simulation of the melting behaviour in an injection moulding plasticizing unit compared with pressure and ultrasound measurements. AIP Proceedings zu PPS Dresden, erschienen

Altmann, D., Köpplmayr, T., Steinbichler, G.: Analytical and Numerical Methods for Optimizing Screw Geometries of an Injection Molding Plasticizing Unit with Focus on Standard Three-Section Screws. AIP Preceedings zu PPS34 Taiwan, akzeptiert


Alzagameem, A., Bergs, M., Witzler, M., El Khaldi­Hansen, B., Klein, S., Hielscher, D., Kamm, B., Kreyenschmidt, J., Tobiasch, E., Schulze, M.: Lignin-Derived Biomaterials for Drug Release and Tissue Engineering. Molecules, 23, 8, 1885, erschienen


Alzagameem, A., El Khaldi­Hansen, B., Büchner, D., Larkins, M., Kamm, B., Schulze, M.: Lignocellulosic Biomass as Source for Lignin-Based Environmentally Benign Antioxidants. Molecules, 10, 3, 2664, erschienen


Bliem, P., van Herwijnen, H. W. G., Riegler, M., Konnerth, J.: Investigation of important influencing factors on the tensile shear strength of two component polyurethane with distinct foaming behavior. International Journal of Adhesion and Adhesives, 84, 343–349, erschienen


Bober, P., Gavrilov, N., Kovalcik, A., Mičuŝík, M., Unterweger, C., Paŝti, I., Ŝedĕnková, I., Acharya, U., Pfleger, J., Filippov, S.K., Kuliček, J., Omatstová, M., Breitenbach, S., Ćirić­Marjanović, G., Stejskal, J.: Electrochemical properties of lignin/ polypyrrole composites and their carbonized analogues. Materials Chemistry and Physics, erschienen


Duchoslav, J., Kehrer, M., Hinterreiter, A., Duchoslav, V., Unterweger, C., Fürst, C., Steinberger, R., Stifter, D.: Novel protocol for selective and highly eficient chemical derivatization of surface amine groups unsing trifluoroacetic anhydride. Applied Surface Science, erschienen


Ecker, J., Burzic, I., Haider, A., Eder, G., Hild, S.: Mechanical properties and water absorption behaviour of PLA and PLA/Wood composites prepared by 3D printing and injection moulding. Rapid Prototyping Journal, akzeptiert


Ecker, J., Fürst, C., Unterweger, C., Plank, B., Haider, A.: 3D CT as Quality Control Tool in Advanced Composite Manufacturing. Nondestructive Testing (NDT.net), ISSN 1435­4934, http://www. ndt.net/search/docs.php3?showForm=off&id=21944, erschienen


Ecker, J., Kracalik, M., Hild, S., Haider, A.: 3D – Material Extrusion - Printing with Biopolymers: A Review. Journal of Polymer Composites, 5(4), 83–96, DOI: 10.13189/ cme.2017.050402, erschienen

Herzele, S., van Herwijnen H. W. G., Edler, M., Gindl­Altmutter, W., Konnerth, J.: Cell-layer dependent adhesion differences in wood bonds. Composites Part A, 114, 21–29, erschienen

Hogger, E.M., Bauer, K., Höllbacher, E., Gierlinger, N., Konnerth, J., van Herwijnen, H.W. G.: Time-dependent ammonia emissions from fumed oak wood. Holzforschung, Doi: https://doi.org/10.1515/hf­20180042, erschienen

Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J.: Cold tack of urea formaldehyde as an important factor in plywood production. European Journal of Wood and Wood Products, 76, 1391–1398, erschienen

Khalifa, M., Deeksha, B., Mahendran, A.R., Srinivasan, A.: Synergism of Electrospinning and Nano-Alumina trihydrate on polymorphism, crystallinity and piezoelectric performance of PVDF nanofibers. The Journal of the Minerals, Metals & Materials Society, DOI10.1007/ s11837­018­2811­6, erschienen

Khalifa, M., Mahendran, A.R., Srinivasan, A.: Durable, Efficient, and Flexible Piezoelectric Nanogenerator from Electrospun PANi/HNT/PVDF Blend Nanocomposite. Polymer Composites, erschienen

Köhnke, J., Gierlinger, N., Prats­Mateu, B., Unterweger, C., Solt, P., Mahler, A., Schwaiger, E., Gindl­Altmutter, W., Liebner, F.: Comparison of four technical lignins as resource for electrically conductive carbon particles. BioResources, akzeptiert

Köhnke, J., Rennhofer, H., Lichtenegger, H., Mahendran, A.R., Unterweger, C., Prats­Mateu, B., Gierlinger, N., Schwaiger, E., Mahler, A., Potthast, A., Gindl­Altmutter, W.: Electrically Conducting Carbon Microparticles by Direct Carbonization of Spent Wood Pulping Liquor. ACS Sustainbale Chemistry & Engineering, 2018, 6 (3), pp 3385–3391, erschienen

Köhnke, J., Rennhofer H., Unterweger, C., Gierlinger, N., Keckes, J., Zalesak, J., Zollfrank, C., Rojas, O., Gindl­Altmutter, W.: Electrically  conductive submicron carbon particles from lignin: elucidation of nanostructure and use as filler in cellulose nanopapers. Nanomaterials,Doi: 10.3390/nano8121055, erschienen

Kovalcik, A., Pastorek, M.: Effects of Thermal Annealing as Polymer Processing Step on Poly(lactic acid). Materials and Manufacturing Processes, erschienen

Kovalcik, A., Pérez­Camargo, R., Fürst, C., Kucharczyk, P., Müller, A.: Nucleating efficiency and thermal stability of industrial non-purified lignins and ultrafine talc in poly(lactic acid) (PLA). Polymer Degradation and Stability, erschienen

Labus, A.B., Schönicke, P., Kamm, B.: „Biokraftstoffalternative: Butanol-Fermentation von mit wässrigem AFEX vorbehandelten Reststoffen“. Biospektrum, 24, 3, 330­332, erschienen

Lettner, M., Solt, P., Rößinger, B., Pufky­Heinrich, D., Jääskeläinen, A., Schwarzbauer, P., Hesser, F.: From Wood to Resin–Identifying Sustainability Levers through Hotspotting Lignin Valorisation Pathways. Sustainability, 10, 2745, erschienen

Mahendran, A.R., Wuzella, G., Pichler, S., Lammer, H., Gindl­Altmutter, W.: Properties of different chemically treated woven hemp fabric reinforced bio-composites. Journal of Renewable Materials, akzeptiert

Meints, T., Hansmann, C., Gindl­Altmutter, W.: Dimensional stabilisation of oak wood treated with polyethylene glycol. Polymers, 10, 81, Doi:10.3390/polym10010081, erschienen

Meints, T., Müller, M., Hansmann, C., Liebner, F., Gindl­Altmutter, W.: Highly-efficient impregnation and modification of spruce wood with epoxy-functional siloxane using supercritical carbon dioxide solvent. Wood Science and Technology, 52, 6, 1607–1620, erschienen

Mimini, V., Kabrelian, V., Fackler, K., Hettegger, H., Potthast, A., Rosenau, T.: Lignin-based foams as insulation materials – a review. Holzforschung, 72, erschienen

Mimini, V., Sykacek, E., Syed Hashim, S., Holzweber, J., Hettegger, H., Fackler, K., Potthast, A., Mundigler, N., Rosenau, T.: Compatibility of Kraft Lignin, Organosolv Lignin and Lignosulfonate with PLA in 3D Printing. Journal of Wood Chemistry and Technology, akzeptiert

Mozdyniewicz, D., Schwaighofer, A., Wieland, K., Häubl, M., Lendl, B.: FTIR Micro-Spectroscopy for Characterisation of Radial Substituent Diffusion in Cellulose II-Beads. Lenzinger Berichte, 94, 27–31, erschienen

Pinkl, S., Riegler, M., Van Herwijnen, H.W.G., Veigel, S., Gindl­Altmutter, W.: Urea-formaldehyde microspheres as a potential additive to wood adhesive. Journal of Wood Science, 64, 390–397, erschienen

Pöll, C., Riegler, M., Breitenecker, F.: Concept for Mathematical Models for Subprocesses in the Manufacture of Particleboards. Simulation Notes Europe, 28, 3, 105–107, erschienen

Ranacher, L., Höfferer, K., Lettner, M., Hesser, F., Stern, T., Rauter, R., Schwarzbauer, P.: What would potential future opinion leaders like to know? An explorative study on the perceptions of four wood-based innovations. Die Bodenkultur – Journal of Land Management, Food and Environment, 69, 47–60, erschienen

Rindler, A., Rößler, C., Hansmann, C., Müller, Ul., Konnerth, J.: Moisture related elastic and viscoelastic behaviour of wood adhesives by means of in-situ nanoindentation. International Journal of Adhesion and Adhesives, 85, 123–129, erschienen

Rößler, C., Riegler, M., Breitenecker, F.: Modeling and simulation of moving wood chips and resin droplets within a resinating mixer using lattice gas cellular automata. IFAC­PapersOnLine, 51, 2, 55–60, erschienen

Sarannya, V., Rishwana, S., Mahalakshmy, R., Mahendran, A.R., Vijayakumar, C.T.: Bis(isomaleimide) and diphenol blends: Non-isothermal degradation kinetics and TG-FTIR studies. Journal of Elastomers and 5 Plastics, erschienen

Schmelzenbart, A., Letter, M., Hesser, F., Schwarzbauer, P.: Barriers and incentives on the market diffusion of lignin composites - a delphi swot analysis. PRO LIGNO, 14, 73–81, erschienen

Schober, A., Šimunović, N., Darabant, D., Stern, T.: Identifying sustainable forest management research narratives: a text mining approach. Journal of Sustainable Forestry, 37, 537–554, erschienen

Scholz, R., Herbig, F., Beck, D., Spörl, J., Hermanutz, F., Unterweger, C., Piana, F.: Improvements in the Carbonisation of Viscose Fibres, Reinforced Plastics, https://www. sciencedirect.com/science/article/pii/ S003436171830403X, erschienen

Šimunović, N., Hesser, F., Stern, T.: Frame Analysis of ENGO Conceptualization of Sustainable Forest Management: Environmental Justice and Neoliberalism at the Core of Sustainability. Sustainability,10, 3165, erschienen

Solt, P., Lingenfelter, P., Konnerth, J., van Herwijnen, H.W.G.: Impact of molecular weight of kraft-lignin on adhesive performance of lignin based phenol formaldehyde resins. Forest Products Journal, Doi.org/10.13073/FPJ­D­17­00079, erschienen

Solt, P., Rößiger, B., Konnerth, J., van Herwijnen, H.W.G.: Lignin phenol formaldehyde resoles using base-catalyzed depolymerized kraft lignin. Polymers, 10, 1162, erschienen

Sparlinek, L., Leitner, V., Kamm, B.: Statistical optimisation of enzymatic detoxification with laccase from Trametes versicolor for spent sulphite liquors using a novel in-situ NMR method. J. of Biotechnology, 284, 63–67, erschienen

Stern, T., Ploll, U., Spies, R., Schwarzbauer, P., Hesser, F., Ranacher, L.: Understanding Perceptions of the Bioeconomy in Austria - An Explorative Case Study. Sustainability, 10, 4142, erschienen

Stern, T., Ranacher, L., Mair, C., Berghäll, S., Lähtinen, K., Forsblom, M., Toppinen, A.: Perceptions on the Importance of Forest Sector Innovations: Biofuels, Biomaterials, or Niche Products? Forests, 9, 1–13, erschienen

Sutterlüty, A., Šimunović, N., Hesser, F., Stern, T., Schober, A., Schuster, K.C.: Influence of the geographical scope on the research foci of sustainable forest management: Insights from a content analysis. Forest Policy and Economics, 90, 142–150, erschienen

Süß, R., Kamm, B., Leitner V.: Validierung von Quantifizierungsmethoden d. Prod. von PHB mittels Halomonas Halophila. BioSpektrum, akzeptiert

Thébault, M., Kandelbauer, A., Eicher, I., Geyer, B., Zikulnig­Rusch, E.: Properties Data of Phenolic Resins Synthetized for the Impregnation of Saturating Kraft Paper. Data in Brief, https://doi.org/10.1016/j. dib.2018.07.006, erschienen

Thébault, M., Kandelbauer, A., Zikulnig­Rusch, E., Putz, R., Jury, S., Eicher, I.: Impact of phenolic resin preparation on its properties and its penetration behavior in Kraft paper. European Polymer Journal, 104, 90­98, DOI: 10.1016/j.eurpolymj.2018.05.003, erschienen

Urdl, K., Weiss, S., Karpa, A., Perić, M., Zikulnig­Rusch, E., Brecht, M., Kandelbauer, A., Müller, U., Kern, W.: Furan-Functionalised Melamine-Formaldehyde Particles Performing Diels-Alder Reactions. European Polymer Journal, DOI­info: 10.1016/j.eurpolymj.2018.08.023, erschienen

Weiss, S., Marco Neu, P., Ludwig, C., Schober, S., Mittelbach, M.: Novel Method for the Synthesis of Cholesteryl Glucosides starting from Disaccharides. European Journal of Lipid Science and Technology, OI:10.1002/ejlt.201700389, erschienen

Widhalm, B., Srebotnik, E., Kuncinger, T., Rieder­Gradinger, C.: Biotechnological approach for the degradation of Δ3-carene for a simultaneous reduction of the major terpenes in pine wood and Oriented Strand Boards. International Biodeterioration and Biodegradation,134,103–109, erschienen

Winter, A., Mundigler, N., Holzweber, J., Veigel, S., Kovalcik, A., Gindl­Altmutter, W.: Residual wood polymers facilitate compounding of microfibrillated cellulose with poly(lactic acid) for 3D printer filaments. Philosophical Transactions A, erschienen

Wittmann, F., Hesser, F., Schwarzbauer, P.: Poultry farmers‘ preferences and use of poultry beddings in Austria and Germany. Austrian Journal of Agricultural Economics and Rural Studies. 27, 51–59, erschienen