FACHZEITSCHRIFTEN

Fachzeitschriften (reviewed)

 

2023

 

Aigner, D., Hinterholzer, L., Almhofer, L., Bischof, R.H., Wrodnigg, T.M.: Conversion of Xylose into D-Xylitol using Catalytic Transfer Hydrogenation with Formic Acid as H-Donor. BioResources, 18, 4, 8631-8652, 31.10.2023, veröffentlicht

 

Almhofer, L., Paulik Ch., Bischof, R.H.: Simultaneous posthydrolysis and liquid–liquid extraction: a SIMPLLE process to detoxify eucalyptus prehydrolysis liquor. Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-023-04570-6, 24.07.2023, veröffentlicht

online"

 

Averina, E., Konnerth, J., van Herwijnen, H.W.G., Li, K.: Investigation of poly (styrene-4-vinylbenzyl chloride) as a curing agent for alternative plant proteins. The Journal of Adhesion, https://doi.org/10.1080/00218464.2023.2231381, 02.06.2023, veröffentlicht

 

Bartolome, M. J., Padhi, S.S.P., Fichtberger, O.G., Schwaiger, N., Seidl, B., Kozich, M., Nyanhongo, G.S., Guebitz, G. M.: Improving properties of starch-based adhesives with carboxylic acids and enzymatically polymerized lignosulfonates. International Journal of Molecular Sciences, 23, 135457, 04.11.2022, veröffentlicht

 

Breitenbach, St., Knapic, D., Unterweger, Ch., Fürst, Ch., Hassel, A.W.: Lignin-based porous junction for silver-silver chloride reference electrodes. Journal of Electrochemical Science and Engineering, https://doi.org/10.5599/jese.1520, 30.01.2023, veröffentlicht

 

Ebner, S., Spirk, S., Stern, T., Mair-Bauernfeind, C.: How Green are Redox Flow Batteries? ChemSusChem 2023, e202201818. 01.02.2023, veröffentlicht

 

Ekbote, G., Khalifa, M., Venkatesa Perumal, B., Anandhan, S.: A new multifunctional energy harvester based on mica nanosheets-dispersed PVDF nanofabrics featuring piezo-capacitive, piezoelectric and triboelectric effects. RSC applied Polymer science, 10.1039/D3LP00080J, veröffentlicht

 

Ekbote, G., Khalifa, M., Venkatesa Perumal, B., Srinivasan, A.: Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics. Flexible and Printed Electronics, 10.1088/2058-8585/acd010, 02.05.2023, veröffentlicht

 

Derbas, M., Frömel-Frybort, St.., Laaber, C., Möhring, H.C., Riegler, M.: Supervised classification of wood species during milling based on extracted cut events from ultrasonic air-borne acoustic signals. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2023.2214118, 22.05.2023, veröffentlicht

 

Derbas, M., Jaquenmond, A., Frömel-Frybort, St., Güzel, K., Möhring, H.C., Riegler, M: Multisensor data fusion and machine learning to classify wood products and predict workpiece characteristics during milling. CIRP: Journal of manufacturing science and technology, 27.09.2023, veröffentlicht

 

Derflinger, Ch., Kamm, B., Leitner, G., Paulik, Ch.: Novel synthesis strategy for the production of fully bio-based binders using 2,5-diformylfuran. European Journal of Organic Chemistry, 26 (23) 2023, https://doi.org/10.1002/ejoc.202300311, 10.05.2023, veröffentlicht

 

Derflinger, Ch., Kamm, B., Meissner, G., Spod, H., Paulik, Ch.: Development of a consolidated heterogeneous chemical process for selective oxidation of HMF for industrial upscaling. Chemistry Select, https://doi.org/10.1002/slct.202302056, 09.10.2023, veröffentlicht

 

Dhanalakshmi, J., Saravanamuthu, S.K.S., Sivaprakash, S., Vijayakumar, Ch.T.: Studies on thermoset blend of bismaleimide having multiple S.: groups and biscyanate ester. Journal of Elastomers & Plastics, https://doi.org/10.1177/00952443231158780, 15.02.2023, veröffentlicht

 

Distler, T., Huemer, K., Leitner, V., Bischof, R.H., Groiß, H., Guebitz, G. M.: Production of bacterial cellulose by Komagateibacter intermedius from spent sulfite liquor. Bioresource Technology Reports, 24, 101655, https://doi.org/10.1016/j.biteb.2023.101655, 01.12.2023, veröffentlicht

 

Ferdinánd, M., Jerabek, M., J., Várdai, R., Lummerstorfer, T., Pretschuh, C., Gahleitner, M., Faludi, G., Móczó, J., Pukánsky, B.: Impact modification of wood flour reinforced PP composites: Problems, analysis, solution. Composites Part A, 167, https://doi.org/10.1016/j.compositesa.2023.107445, 13.01.2023, veröffentlicht

 

Ferdinand, M., Vardai, R. Lummerstorfer, T., Pretschuh, C., Gahleitner, M., Moczo, J., Pukanszky, B.: Impact modification of PP with short PET fibres: Effect of heat setting on fiber characteristics and composite properties. Composite Structures, 311, 16.02.2023, veröffentlicht

 

Gavrilov, N., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pašti, I.A.: Exploring the Impact of DAHP Impregnation on Activated Carbon Fibers for Efficient Charge Storage and Selective O2 Reduction to Peroxide C. https://doi.org/10.3390/c9040105, 06.11.2023, veröffentlicht

 

Goto, T., Zaccaron, S., Hettegger, H., Bischof, R.H., Fackler, K., Potthast, A., Rosenau, T.: Evaluating chelating agents and their effects on cellulosic pulps during P-stage bleaching. Part 1: analytical method development. Cellulose, 30, 3887–3900, 04.03.2023, veröffentlicht

 

Gritsch, S.M., Mihlyi, S., Bartl, A., Ipsmiller, W., Jan-Halver, U., Putz, R., Quartinello, F., Gübitz, G.M.: Closing the cycle: Enzymatic recovery of high purity glucose and polyester from textile blends. Resources, Conservation and Recycling, 188, 106701, https://doi.org/10.1016/j.resconrec.2022.106701, 31.01.2023, veröffentlicht

 

Gupta, N., Mahendran, A.R., Khalifa, M.: Application of Printed Paper Sensors in Characterizing Curing Behavior of Thermosetting Resin Systems Using Dielectric Spectroscopy. IEEE Xplore, DOI: 10.1109/IWIS61214.2023.10302760, veröffentlicht

 

Hesser, F., Groiß-Fürtner, D., Woitsch, L., Mair-Bauernfeind, C.: Ex-Ante Eco-Efficiency Assessment of Dendromass Production: Conception and Experiences of an Innovation Project. Land 2023, https://doi.org/10.3390/land12040839, 12, 839, 06.04.2023, veröffentlicht

 

Husić, I., Mahendran, A.R., Sinic, J., Jocham, Ch., Lammer, H.: Interaction of porous substrate and vegetable oil-based hydrophobic thermoset coatings during UV-polymerization. Journal of Plastic Film and Sheeting, 39, 4, https://doi.org/10.1177/87560879231190574, 04.10.2023, veröffentlicht

 

Janesch, J., Bacher, M., Padhi, S.S.P., Rosenau, T., Gindl-Altmutter, W., Hansmann, Ch.: Bio-based alkyd resins from plant oil and furan-2,5-dicarboxylic acid. ACS Sustainable Chemistry & Engineering, 11, 50, 17625–17632, 04.12.2023, veröffentlicht

 

Jaxel, J., Merio, A., Kohlhuber, N., Beaumont, M., Wimmer, R., Rosenau, T., Hansmann, Ch., Liebner, F., Böhmdorfer, S.: Facile chemical hydrophobization of thin-layer plates by vapor deposition of methyltrimethoxysilane for reversed-phase chromatography. JPC - Journal of Planar Chromatography - Modern TLC, https://doi.org/10.1007/s00764-023-00258-9, 2023, veröffentlicht

 

Khalifa, M., Berndt, A., Shamitha, C., Lammer, H., Wuzella, G.: Hybridization Effect of Cellulose Paper and Post-curing Conditions on the Mechanical Properties of Flax Fiber Reinforced Epoxy Bio-Composite. Journal of applied polymer science, 10.1002/app.20222123, 10.01.2023, veröffentlicht

 

Khalifa, M., Gupta, N., Bagawan, A. H., Lammer, H., Wuzella, G.: Multifunctional PVDF Film Embedded with Surfactant Assisted-Graphene with Excellent Piezo-capacitance. Piezoelectric and Triboelectric Properties for Various Applications, Polymer, 10.1016/j.polymer.2023.126383, veröffentlicht

 

Khalifa, M., Wuzella, G., Lammer, H.: The Green Catalyst: Role of Hemp Fibers in the Curing Reaction of Bio-Based Epoxy Composites. Materials Today Communications, 10.1016/j.mtcomm.2023.107052, veröffentlicht

 

Kienberger, M., Demmelmayr, P., Leitner, V., Egermeier, M.: Selective isolation of acetic acid and lactic acid from heterogeneous fermentation of xylose and glucose. Environmental Technology & Innovation, 29, https://doi.org/10.1016/j.eti.2023.103024, 01.02.2023, veröffentlicht

 

Krassnitzer, P., Wenger, J., Stern, T.: Techno-economic learning in biorefinery research: a meta-level perspective of three exemplary cases. Biofules, Bioproducts and Biorefining, 13.10.2023, veröffentlicht

 

Kubik, P., Sebek, F., Krejci, P., Brabec, M., Tippner, J., Dvoracek, O., Lechowicz, D., Frömel-Frybort, St.: Linear woodcutting of European beech: Experiments and computations. Wood Science and Technology, 57, 51-74, Jänner 2023, veröffentlicht

 

Lazarević-Pašti, T., Jocic, A., Milankovic, V., Tasic, T., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pasti, I.: Kinetics of dimethoate, malathion, and chlorpyrifos adsorption on cellulose-derived activated carbons – linking performance to physicochemical properties of the adsorbents. Materials Today Communications, 13.06.2023 veröffentlicht

 

Leitner, V., Aufischer, G., Solt-Rindler, P., Streffer, F., Gabler, C., Noack, J., van Herwijnen, H.W.G., Paulik, Ch.: Agricultural residue lignin from novel low temperature pre-treatment as potential raw material for LPF resins. Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-023-04028-9, 09.03.2023, veröffentlicht

 

Mihalic, M., Pretschuh, C., Lummerstorfer, T., Unterweger, Ch.: Physical and Chemical Foam Injection Moulding of Natural Fibre Reinforced Polypropylene – Assessment of weight reduction potential and mechanical properties. Journal of Composites Science, https://www.mdpi.com/2504-477X/7/4/144, 06.04.2023, veröffentlicht

 

Milan, F., Vardai, R., Lummerstorfer, T., Pretschuh, C., Gahleitner, M., Moczo, J., Pukanszky, B.: Comparison of the effect and efficiency of two impact modification approaches in polypropylene. Express Polymer Letters, 17, 8, 837-849,     27.04.2023, veröffentlicht

 

Nasseri, L., Rosenfeld, C., Solt-Rindler, P., Mihalic, M., Kandelbauer, A., Konnerth, J., van Herwijnen, H.W.G.: Determination of the gel point of formaldehyde-based wood adhesive by using a multiwave technique. ACS Applied Polymer Materials, 5, 8, 6354, 01.08.2023, veröffentlicht

 

Pfennich, A.Ch., Schöffmann, E.A., Lammer, H., Hirn, U.: Water-dispersible paper for packaging applications - balancing material strength and dispersibility. Nordic Pulp and Paper Research Journal, https://doi.org/10.1515/npprj-2023-0048, 26.09.2023, veröffentlicht

 

Preimesberger, Ch., Solt-Rindler, A., Hansmann, Ch., Pfeifer, C.: Influence of size and temperature on the auto-ignition characteristics of solid beech and spruce wood. Fuel, https://doi.org/10.1016/j.fuel.2022.127140, 127140, 01.04.2023, veröffentlicht

 

Preimesberger, Ch., Wondrak, M., Solt-Rindler, A., Pfeifer, C., Hansmann, Ch.: Size and temperature dependent oxidative pyrolysis and auto-ignition of spherical beech and spruce wood. Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-023-03977-5, 25.02.2023, veröffentlicht

 

Ranjith, A., Mahendran, A.R., Rajkumar, T.: Novel Self Curable phosphorous and spiro phosphorous based maleimides: synthesis, characterization, cure bahavior and thermal properties. Phosphorus, Sulfur, and Silicon and the Related Elements, DOI: 10.1080/10426507.2023.2176499, 20.02.2023, veröffentlicht

 

Rauter, L., Zikulnig, J., Moldaschl, Th., Holzman, D., Neumaier, L., Khalifa, M., Faller, L. M., Kosel, J.: Printed wireless battery-free sensor tag for health monitoring of polymer composites. IEEE Xplore, 10.1109/JFLEX.2023.3277802,             01.03.2023, veröffentlicht

 

Rußmayer, H., Egermeier, M., Marx, H. Leitner, V., Sauer, M.: Entirely oil palm-based production of 1,3-propanediol with Lentilactobacillus diolivorans. Environmental Technology & Innovation, https://doi.org/10.1016/j.eti.2023.103024, 19.01.2023, veröffentlicht

 

Saravanamuthu, S.K.S., Syed Mohammed, S.R., Dhanalakshmi, J., Mahendran, A.R., Vijayakumar Ch.T.: Fumarate metal organic frameworks as reactive and curing reaction alternant in hydrophobic bispropargyl ether based matrix resin system. Journal of Polymer Research, https://doi.org/10.1007/s10965-023-03817-0, veröffentlicht

 

Schierer, V., Rieder-Gradinger C., Rosenberg, E.: Method comparison for the identification and characterization of odorants from Scot’s pine (Pinus sylvestris) and OSB made thereof by GC-MS and GC-FID/O using different headspace techniques.           C+46:58hemosensors, 11, 10, 543, 19.10.2023, veröffentlicht

 

Slavec, A., Hoeben, A., Moreno-Torres, M, Primozic, L., Stern, T.: When intentions do not matter: Climate change mitigation and adaptation innovations in the Forest-based sector. Forest Policy and Economics, Volume 157, 01.12.2023, veröffentlicht

 

Solt-Rindler, A., Busquets-Ferrer, M., Averina, E., Solt-Rindler, P., Vay, O., Gindl-Altmutter, W., van Herwijnen, H.W.G., Hansmann, Ch.: Hochleistungsmaterialien aus nachwachsenden Rohstoffen. Holztechnologie, 63, 4, 05.-12.2023, veröffentlicht

 

Stockinger, T., Steiner, M., Egger, F., Padinger, F., Schwödiauer, R., Wilmer, D., Mahendran, A.R., Kaltenbrunner, M., Müller, U.: High porous, ultra-thin paper sensors − An option for successful sensor integration. Sensors and Actuators A: Physical, 350 (2023), https://authors.elsevier.com/c/1gIgw3IC9dBKKe, 13.12.2022 (online), 2023 (print), veröffentlicht

 

Tasić, T., Milanković, V., Batalović, K., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pašti, I.A., Lazarević-Pašti, T.: Application of viscosebased porous carbon fibers in food processing - malathion and chlorpyrifos removal. Foods, https://www.mdpi.com/2304-8158/12/12/2362, 13.06.2023, veröffentlicht

 

Vijayakumar, Ch.T., Saravanamuthu, S.K.S., Mahendran, A.R., Syed Mohammed, S.R.: Application of Metal Organic Frameworks as Reactive filler in Bisphenol A based High temperature Thermosets. Intech Open, 07.12.2022, veröffentlicht

 

Vladan, A., Tasić, T., Milanković, V., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Bajuk-Bogdanović, D., Pašti, I.A., Lazarević-Pašti, T.: How well do our adsorbents actually perform? – The case of dimethoate removal using viscose fibers-derived carbons. International Journal of Environmental Research and Public Health,             https://www.mdpi.com/1660-4601/20/5/4553, 06.03.2023, veröffentlicht

 

Wolfsgruber, M., Patil, P., Pichler, C. M., Bischof, R.H., Budnyk, S., Paulik, Ch., Slabon, A.: Potential dependence of gluconic acid to glucose electroreduction on silver. Catalysis Science & Technology, https://doi.org/10.1039/D3CY00897E, 30.08.2023, online veröffentlicht

 

Wurzer, G. K., Bacher, M., Musl, O., Kohlhuber, N., Sulaeva, I., Kelz, T., Fackler, K., Bischof, R.H., Hettegger, H., Potthast, A., Rosenau, T.: From liquid to solid-state, solvent-free oxidative ammonolysis of lignins–an easy, alternative approach to generate “N-lignins”. RSC advances, 13, 14, 9479-9490, 01.10.2023, veröffentlicht

 

Zeppetzauer, F., Süss, R., Nadányi, R., Putz, R., Lisý, A., Paulik, Ch., Šurina, I., Strižincová, P., Huemer, K., Kamm, B.: Environmentally friendly extraction from Picea abies bark as an approach to accessing valuable antioxidants in biorefineries. Molecules, https://www.mdpi.com/2227-9717/11/7/2145, 18.07.2023, veröffentlicht